What Are Mold, Mildew and Mycotoxins?<\/h2>\n\n\n\n
Molds are fungi. Mold is a natural recycler of dead organic matter; the function of mold is to decompose things\/ break them down… so that puts into perspective the damage they can do to people.<\/p>\n\n\n\n
Mold usually comes in these colors: black<\/a>, blue or green<\/a>. Of all mold types, black mold (officially called Stachybotrys<\/a>) is considered to be the most harmful one to the health of living beings. This particular mold produces a neurotoxin that has been used in biological warfare. Not all mold that looks black is this type though.<\/p>\n\n\n\n Basically mold is like something out of a horror movie; invisible toxins that can go through walls and permate some materials forever.<\/p>\n\n\n\n What people think is mildew is usuactually mold. Actual mildew is different than mold and is not a living organism. It is often white or grey.<\/p>\n\n\n\n Pink mold<\/a> is not actually a \u201cmold<\/a>,\u201d but a bacterial growth commonly found in damp areas of the home like the bathroom and kitchen. It acts similar to mold and will return if not remediated properly. It also poses health risks that mimic various types of molds<\/a> as well. These are just a few reasons why it\u2019s classified as a mold.<\/p>\n\n\n\n Molds produce microscopic spores that germinate where moisture has accrued. You can\u2019t see individual mold spores or mycotoxins with the naked eye. Mold spores range in size from 4-20 microns…so up 250,000 mold spores can fit on the head of a needle. Mold spores can vary in size, color, structure, etc. Mycotoxins (the dangerous chemical byproduct produced by SOME types of mold ) can float around on mold fragments which are even smaller, 1-.03 microns.<\/p>\n\n\n\n <\/p>\n\n\n\n Molds can be allergenic, pathogenic, or toxigenic. They have even been linked to cancer<\/a>. <\/p>\n\n\n\n Not all molds are toxic (but all of them have the potential to cause health problems, so should all be considered hazardous). A toxic mold is one that is capable of producing MYCOTOXINS. Not all molds are able to produce mycotoxins. Some molds may be allergenic and some pathogenic. <\/p>\n\n\n\n Toxic mold doesn\u2019t constantly create mycotoxins; it does it when it feels threatened, as a defense mechanism to protect itself. This typically happens in response to other molds that are competing for it\u2019s food source, or bacteria or invaders. Or, if someone is trying to kill it or disturb with bleach or chemicals.<\/p>\n\n\n\n Mycotoxins are essentially a poisonous chemical designed to kill living things. Mycotoxins are NOT living things and thus can\u2019t be \u201ckilled\u201d themselves. Mycotoxins are a liquid that can absorb into mold spores and fragments. These spores and fragments containing mycotoxins can then spread easily like other particles (i.e. dust) from items, people and the mold source, etc. This is why proper containment and safe remediation practices are so important. It also makes removal more complicated.<\/p>\n\n\n\n <\/p>\n\n\n\n The main source of information in the first few sections of this post is Mold Busters<\/a>, but I also added in quite a few additions, many other sources and unique perspectives from me. Unless otherwise noted, all images have watermarks within the image, showing where they originated. I have no affiliation to any products, companies, or groups mentioned.<\/p>\n\n\n\n Mold spores are widespread outside, and many find their way indoors. The spores typically need only three conditions in order to grow and thrive:<\/p>\n\n\n\n 1. The right temperature<\/p>\n\n\n\n 2. A food source (this can include drywall and even dust)<\/p>\n\n\n\n 3. Moisture<\/p>\n\n\n\n Not much is needed for mold spores to grow out of control. Some species of mold require very little water and can actually survive in the desert.<\/p>\n\n\n\n Mold exposure can lead to serious health problems<\/a>. Toxigenic mold produces extremely potent toxins called mycotoxins<\/a> \u2013 toxic chemicals present inside or on the surface of the mold spore, which can be inhaled, ingested, or touched.<\/p>\n\n\n\n Exposure to mold growing indoors<\/a> can be associated with nasal and sinus congestion, irritation of eyes\/nose\/ skin, cough\/sore throat, asthma (or exacerbation of it), fatigue, mental confusion, neurological problems, nosebleed, headache, skin and eye irritation, etc., sensitization, neurotoxicity (scientific paper source<\/a>), neuropsychiatric effects (video<\/a>), sinusitis, otomycosis, onychomycosis, eratitis, respiratory infections, skin infections, rage, and systemic infections. There has been scientific research that shows connections to (but not the only cause of) Autism, cancer, Lyme, and more.<\/p>\n\n\n\n Health effects associated with mycotoxins in humans include: Hepatic toxicity, cancers (liver, esophageal, lymphoma, skin, and gastric), nephrotoxicity, hypertension, hyperlipidemia, immunosuppression, and nasal irritation\u201d Government source<\/a>) and mitochondrial dysfunction (scientific paper source<\/a>).<\/p>\n\n\n\n A comprehensive review of the effects of mycotoxins, including, the blood brain barrier, oxidative damage, neurological damage, mitochondrial dysfunction, mast cell activation, immune disregulation, and more is linked here<\/a>. <\/p>\n\n\n\n In addition to the symptoms listed in the image below, dry skin, rashes and rage<\/a> are also a symptom. Yeast and parasite overgrowth is also common, as mold reduces the body\u2019s balancing abilities. Heavy metals can also exacerbate mold\u2019s effects. <\/p>\n\n\n\n <\/p>\n\n\n\n Long-term exposure to indoor mold can lead to health issues<\/a> that develop faster for certain groups \u2013 infants, children and elderly people. Roughly 2\/4 of the population may have genetic or other factors that make them more susceptible.<\/p>\n\n\n\n <\/p>\n\n\n\n \u201cResearchers also note there is strong evidence that early life exposure to damp environments, molds and mycotoxins during infancy and childhood can cause developmental delays, reduced cognitive function and immune dysfunction. Children who live in damp houses during infancy or early childhood have double the risk of a condition developing adenoid hypertrophy, an enlargement of tissue that often leads to ear, nose and throat issues. And the health battles can last long after someone leaves a moldy environment.\u201d (Source<\/a>)<\/p>\n\n\n\n Mold \/mycotoxins can also weaken \/ damage the defenses your body has, leaving you susceptible to other issues, such as Candida.<\/p>\n\n\n\n I personally have experienced insomnia, extreme fatigue, histamine sensitivity, Chronic Inflammatory Response Syndrome<\/a> (CIRS) and have seen in children Pediatric Acute-onset Neuropsychiatric Syndrome (PANS) Here is an article<\/a> (hyperlink) about what mold toxicity can feel like.<\/p>\n\n\n\n Mold growth can damage walls, tiles, carpets and other surfaces, and threatens the structural integrity of buildings.<\/p>\n\n\n\n <\/p>\n\n\n\n Generally speaking, mold often grows on bathroom grout, water-damaged walls, and wet or damp carpets and as well as around tubs, sinks and windows.<\/p>\n\n\n\n But sometimes mold can hide in places like behind walls, attics, crawl spaces, basements, drains, underneath floorboards and in air conditioners and HVAC ductwork, so make sure to check all of these areas thoroughly. Tools that professionals use to look include infrared cameras, moisture meters, and air sampling pumps.<\/p>\n\n\n\n -It\u2019s always better to prevent mold<\/a> rather than deal with its effects. If you want to prevent the mold from growing in the first place, ensure that you dry any wet materials within 24 hours, as it can begin growing quickly. This article<\/a> explains more. <\/p>\n\n\n\n -Keep moisture levels low; under 50% humidity. Air conditioners and dehumidifiers can help (but mold can grow in dehumidifier tanks). Also avoid condensation; this is potentially more important than air humidity.<\/p>\n\n\n\n -Remove dust and vacuum often.<\/p>\n\n\n\n -Have adequate ventilation, but minimize dust flowing in.<\/p>\n\n\n\n -Declutter. The less stuff you have, the less dust you will have.<\/p>\n\n\n\n -Keep washing machine and dishwasher door cracked open when not running, empty out any water in the detergent cups, wipe out the rubber gasket door seals on front loaders. If your washer has a musty smell, there may be mold growing behind the washer drum. Call the manufacturer (if your machine is under warranty) or a qualified repair person. It may need to be replaced if the mold can\u2019t be removed properly and completely.<\/p>\n\n\n\n -Repair any leaks and thoroughly dry the area promptly.<\/p>\n\n\n\n -Ideally, don\u2019t have carpet; as they are like sponges for particles, and you may be breathing in a number of spores and mycotoxin particles that remain in the carpet.<\/p>\n\n\n\n \u2043Keep your furniture a few inches away from the walls. This creates enough space for fresh air to circulate between the walls and furniture, which will dry up any moisture and prevent mold from developing. Since mold loves dust, you should clean your furniture regularly to reduce dirt and grime.<\/p>\n\n\n\n \u2043Check your plants for signs of mold each time you water them. Take a closer look at the plant soil, and if you see a grayish cover, be warned \u2013 mold is already there. Mold loves moisture and organic matter, and that is exactly what plants can provide. Mold can also be found in plant soil<\/a>, and sometimes even on the leaves.<\/p>\n\n\n\n <\/p>\n\n\n\n BEDROOM<\/strong><\/p>\n\n\n\n -Each piece in your wardrobe needs to be well dried before it\u2019s folded and stored in the closet or storage containers.<\/p>\n\n\n\n -Keep the closet clean and avoid overfilling it at all costs. Wipe away any dust, and vacuum regularly.<\/p>\n\n\n\n -Feathers and quilts are particularly prone to harboring mold spores.<\/p>\n\n\n\n KITCHEN<\/strong><\/p>\n\n\n\n -Hidden areas that are susceptible to mold are: Garbage disposals, garbage cans, refrigerator ice dispensers, sink drains\/ plumbing.<\/p>\n\n\n\n -Avoid leaving wooden items (like cutting boards) wet.<\/p>\n\n\n\n -Open windows when cooking to let the steam escape.<\/p>\n\n\n\n -Prevent food from rotting.<\/p>\n\n\n\n -Keep dishwasher doors open at least a little when not running, and clean out the bottom\/ filter trap.<\/p>\n\n\n\n BATHROOM<\/strong><\/p>\n\n\n\n -If possible, shower with a bathroom door and\/or window open, and leave open afterwards.<\/p>\n\n\n\n -Squeegee the shower door and walls, and encourage as much water as possible to go down the drain. If you really need to eliminate moisture, you could wipe with a towel.<\/p>\n\n\n\n -After showering, allow airflow by leaving shower doors or curtain open at least a little on each side.<\/p>\n\n\n\n -If mold keeps coming back you may have a hidden mold problem such as behind the tiles or bathtub.<\/p>\n\n\n\n -If you have an older Jacuzzi bathtub with jets, it is nearly impossible to prevent mold growth in the hidden tubing. Replace the entire bathtub. I had to do this.<\/p>\n\n\n\n -Clean\/ wash everything frequently (shower curtain, bath mats, toilet, etc).<\/p>\n\n\n\n -Upkeep shower grout and caulk.<\/p>\n\n\n\n -Buy a dehumidifier, empty the water container regularly and wash it. A bit of vinegar or drop of tea tree oil can help prevent mold growth in the water tank. Here is an Amazon associates link to one I use in bathrooms: https:\/\/amzn.to\/3GZqv2D<\/a> <\/p>\n\n\n\n -Information about toilet tank mold is available in this article (hyperlink<\/a>) and this one<\/a> as well. <\/p>\n\n\n\n -And a link about mold growth in pipes<\/a>.<\/p>\n\n\n\n BASEMENT, GARAGE AND STORAGE AREA<\/strong><\/p>\n\n\n\n -If you have a basement (which is very prone to mold), check out the tips in this link<\/a>.<\/p>\n\n\n\n -Don\u2019t forget about the garage, attic and any storage areas or sheds! I run a dehumidifier in the garage. Here is an Amazon associates link to the one I have: https:\/\/amzn.to\/3tiOCE5<\/a><\/p>\n\n\n\n HVAC DUCT CLEANING<\/strong><\/p>\n\n\n\n -Make sure the filters on the HVAC unit are good, because if there\u2019s no dust then mold can\u2019t grow. UV lights in the unit are another controversial issue.<\/p>\n\n\n\n -Duct cleaning is controversial. If you decide to do it, the best method is using negative pressure from the outside of the house to avoid contaminating the inside of the house. But some people claim that it isn\u2019t necessary to clean ducts at all.<\/p>\n\n\n\n -Ducts should be cleaned by a NADCA (National Air Duct Cleaners Association) certified professional following their most recent standards. Spraying and fogging a disinfectant into ducts is not permitted by EPA rules. EPA does not have a single registered product for sanitizing or disinfecting ductwork. To use a product for off label use in this manner is actually illegal (links to this information is below, and quotes are at the very bottom of this blog).<\/p>\n\n\n\n Here is a link<\/a> about how to avoid being scammed by duct cleaning companies.<\/p>\n\n\n\n Another link from NADCA about Using Chemical Products in HVAC Systems.<\/a><\/p>\n\n\n\n This link to checklist designed to help residential consumers understand NADCA\u2019s recommendations regarding the process of HVAC cleaning.<\/a><\/p>\n\n\n\n <\/p>\n\n\n\n AUTOMOBILES<\/strong><\/p>\n\n\n\n Mold can be a hidden problem in vehicles as well! It can grow in the ventilation systems or hidden in carpeting. If you have a sunroof, you need to blow the lines out make sure they’re not clogged. A dealership should be able to help with this.<\/p>\n\n\n\n Without a constant supply of water, mold will \u201cgo to sleep.\u201d However, the spores never actually \u201cdie\u201d considering that they can come back to life once more moisture becomes available. Depending on the type of mold<\/a>, some spores can remain dormant for hundreds of years under the right circumstances. That is why it is not enough to simply eliminate humidity if you have an active mold problem.<\/p>\n\n\n\n \u201cKilling\u201c mold is a common misconception. Mold isn\u2019t a bacteria or virus. You don\u2019t aim to kill mold, you need to remove it (removing walls \/surfaces as necessary) and the spores (wiping\/cleaning, depending on the item). <\/p>\n\n\n\n When mold is killed breaks down into smaller particles that can be breathed deeper and more easily into the lungs, and why we shouldn\u2019t use mold killing solutions or antimicrobials because it causes the molds to react in defense by releasing more mycotoxins.<\/p>\n\n\n\n “A common misperception is that killing mold, which is a relatively easy task, eliminates risk from contaminated environments or items. Unfortunately, this does little to decrease the risk as nonviable fungal spores, fragments, and mycotoxins remain present and, due to their structure, such as with an epoxide ring, [117] they can be extremely difficult to destroy.” https:\/\/www.hindawi.com\/journals\/tswj\/2013\/767482\/<\/a><\/p>\n\n\n\n Mold cannot be sanitized. Sanitizing refers to killing BACTERIA or viruses (but not necessarily removing them). Attempting to kill\/ sanitize it can be extremely harmful and ineffective. Also, dead mold is still hazardous. It must still be removed.<\/p>\n\n\n\n Spraying, fogging, gassing, killing, deodorizing, sanitizing – NONE of these can stop the moisture and none can remove mold. What that can do is just add more substances to already contaminated air.<\/p>\n\n\n\n I don\u2019t claim to have all the answers you might need, but this section has some good tips, resources, and things to look into. <\/p>\n\n\n\n The first step is finding a quality Indoor Environmental Professional (IEP) or Industrial Hygenist (IH) and having them do a thorough assessment of your whole home<\/p>\n\n\n\n NEVER use any kind of bleach<\/a> product on mold. It can cause the mold to release mycotoxins, and does not \u201ckill\u201d or remove mold. Bleach is only designed for non-porous surfaces. Because mold can grow deep roots within porous surfaces such as wood, bleach will not eliminate mold, as the chlorine cannot penetrate to destroy the growth at its roots, while the water component of the bleach actually feeds more mold growth. <\/p>\n\n\n\n While it may reduce the appearance of the mold color by bleaching it, it does not actually remove the mold or spores, which are still toxic even when dead. <\/p>\n\n\n\n Any porous material with mold growth must be physically removed, not just sprayed with bleach or any chemical. This is one of the most widespread hazardous practices. Bleach is also toxic even on its own.<\/p>\n\n\n\n Another incorrect way to deal with mold is painting over it.<\/p>\n\n\n\n Mold growth (as well as any contaminated materials) needs to be completely and carefully removed if you don\u2019t want the mold to grow back. Any porous material with mold growth must be physically removed, not just cleaned off. For example, if it is growing on drywall, that section and two feet around it must be completely removed.<\/p>\n\n\n\n This should be done under containment by professionals, with extreme care not to contaminate other parts of the house.<\/p>\n\n\n\n Mold spores are very light and can become airborne quite easily. This can quickly lead to spreading and the contamination of other areas of your home. Simply letting mold spores dry out without cleaning or wiping them away is not a good solution to mold problems.<\/p>\n\n\n\n Ozone is often recommended but can actually make mold worse<\/a>. It can be better to use AFTER you\u2019ve done all the work to remove mold, and have cleaned your house top to bottom. It cannot do anything for mycotoxins. <\/p>\n\n\n\n Another controversial treatment strategy is hydroxyl or PCO air technology. Some people swear by it, but others say it can make things worse, similar to ozone. <\/p>\n\n\n\n Hydrogen peroxide is often used in remediations, in higher concentrations such as 12 percent peroxide applied several times. However, I have seen it stated that this could cause mycotoxin release. It is thought to be a better option compared to bleach. Amazon associates link to the hydrogen peroxide I use: https:\/\/amzn.to\/3Suo8Na<\/a><\/p>\n\n\n\n Fogging is another controversial thing and there is lots of misinformation about it\u2019s uses. Here is one link<\/a> that advocates against it. Fogging will not kill or remove mold on it\u2019s own; it merely makes the particles in the air heavy so they fall to the ground and then you can clean them up using a HEPA vacuum and\/ or wipes. <\/p>\n\n\n\n For more wiping techniques, there is an ebook by John Banta, who understands the chemistry of mold and how mold gets trapped in the oily residues on surfaces of our homes. He says to wipe down surfaces with something that removes oily residues. I have more notes about this if you\u2019re interested. Check out resources about the \u201cHEPA sandwich\u201d or \u201cHEPA pizza\u201d <\/a>wiping methods.<\/p>\n\n\n\n Ec3 (amazon associates link: https:\/\/amzn.to\/3GZ0oc8<\/a>) is one product that people often use for fogging, or for use when laundering clothes (I use it as a preventative) or wiping items.<\/p>\n\n\n\n Here are four links regarding whether to get rid of possessions or not. It can depend on individual sensitivity to mold. For some molds, they claim that anything porous, including plastics, cannot be cleaned adequately and must be thrown away, or else they can re-contaminate spaces. Other strategies involve storing things in hopes that basically the mold will degrade enough that they can be cleaned later. Check out writings by Carl Grimes about how particles\/ mycotoxins will gradually fall with dust that can be removed through regular cleaning.<\/p>\n\n\n\n https:\/\/www.survivingtoxicmold.com\/saving_your_possessions<\/a><\/p>\n\n\n\n The Mold Avoider\u2019s Dilemma: What Should I Do About My Stuff?<\/a><\/p>\n\n\n\n https:\/\/www.survivingtoxicmold.com\/cleaning_clothes_exposed_to_mold<\/a><\/p>\n\n\n\n https:\/\/www.themoldmedic.com\/how-to-remove-mold-from-personal-belongings\/?fbclid=IwAR3rT1vJGieFBQDgkXjMWVg0A23MJLx8q1CQVIcLYuTM16gCfaZtmaIvuLw&mibextid=Zxz2cZ<\/a><\/p>\n\n\n\n <\/p>\n\n\n\n The type of mold will determine the type of remediation. That said, it is very important to test it first<\/a>. There are many testing options and pretty much all of them are controversial. What they are sampling for is mold spores (not mycotoxins).<\/p>\n\n\n\n Air sampling tests aren\u2019t the best option in many case, because they only sample a three ft. radius of air. Also, many mold spores (including those from Stachybotrys) are heavy and fall to the ground quickly rather than floating in the air. And if you use air filters or purifiers they may be capturing many of the spores. <\/p>\n\n\n\n ERMI is a good place to start and this video<\/a> explains why, and also mentions how thermal cameras can be useful in mold assessments. Note that what is most important in the results is not the overall score, but rather the types of molds and their concentrations. These tests will tell you if you have a mold issue somewhere in your house (including hidden mold). <\/p>\n\n\n\n Envirobiomics and Mycometrics are two companies that provide ERMI & HERTSMI tests. HERTSMI is less extensive than the ERMI and only tests for the most toxic molds. Envirobiomics is faster and a bit cheaper, and offers a 5 minute phone consultation. Mycometrics is a little more expensive and takes longer, but it includes a 30 minute phone call with an expert after you get your results, which can be helpful especially if it\u2019s your first time. I have mainly used Envirobiomics.<\/p>\n\n\n\n Assured Bio Lab offers several different tests that use the same DNA sequencing technology as the ERMI, but some are much less expensive.<\/p>\n\n\n\n The Dust Test<\/a> is similar to the ERMI but claims to be superior. <\/p>\n\n\n\n For testing of specific spots in your house; for instance if you see visible mold growth, the most inexpensive option to find out what type it is are tape tests. Moldcontrolonabudget<\/a>.com will test for just $15.<\/p>\n\n\n\n Sterile swab tests are also an option.<\/p>\n\n\n\n Romer Labs does mycotoxin testing of household dust samples. They need about 25 grams of dust to do a decent screen. If you are really worried about having mycotoxins in the house, you can send them a large amount of dust from a vacuum. Other options that I have heard of are specialty tests like EMMA. Here is a link that compares <\/a>ERMI and EMMA. AirAnswers and RespireAir have also developed air testing method that tests for mycotoxins.<\/p>\n\n\n\n Air testing can be inadequate to determine mold issues, but might be useful AFTER remediation to determine if removal was successful. The air samples should always be free of mold post remediation if they were running air scrubbers, but be aware that used air scrubbers can be contaminated with mold.<\/p>\n\n\n\n There are also dogs that can be brought in to smell where mold is hiding. <\/p>\n\n\n\n Look into post remediation verification testing<\/a> as well. <\/p>\n\n\n\n Here is a thorough guide<\/a> all about mold, water damage and testing within homes. <\/p>\n\n\n\n And another guide<\/a> to where to look for mold and water damage<\/a>. <\/p>\n\n\n\n To test for mold toxins, or mycotoxins, in the urine, these tests are somewhat debated and some argue that food sources can impact the results. Labs that offer these include RealTime Laboratories (https:\/\/RealTimeLab.com<\/a>), Great Plains Laboratory (https:\/\/GreatPlainsLaboratory.com<\/a>), and Vibrant Wellness (https:\/\/Vibrant-Wellness.com<\/a>). <\/p>\n\n\n\n <\/p>\n\n\n\n Know that remediating mold is complicated and can be difficult to do correctly. It helps to learn as much as you can about what constitutes good and bad remediation practices. It is recommend the company you hire follow the standards laid out by IICRC S520<\/a>. Here is a good resource link<\/a>.<\/p>\n\n\n\n The full name is ANSI-IICRC S520 Standard For Professional Mold Remediation. Any IICRC certified contractor and cognizant inspector should have a copy to show you.<\/p>\n\n\n\n Unfortunately many \u201cprofessionals\u201d don\u2019t fully understand mold. If they refer to \u201ckilling\u201d or \u201csanitizing\u201d the mold, encapsulate, or downplay the dangers, that is a huge red flag in my opinion. Ask, \u201cWhat mold remediation standards do you follow?\u201d Don\u2019t ask \u201cdo you follow the IICRC s 520\u201d because they could could just nod because they know you want them to say yes. <\/p>\n\n\n\n You will probably want to hire an IEP (Indoor Environmental Professional) or IH who will surface sample testing for you. If using cotton swabs, there is a special technique so as not to destroy the integrity of the spores.<\/p>\n\n\n\n Here is a database of Building Biology Environmental Consultants<\/a>.<\/p>\n\n\n\n Here is a good book on the subject, by Neil Nathan. It\u2019s called \u201cToxic: Heal Your Body from Mold Toxicity, Lyme Disease, Multiple Chemical Sensitivities , and Chronic Environmental Illness.\u201d Amazon associates link: https:\/\/amzn.to\/460V1UU<\/a> and here is a video<\/a> that seems to summarize the treatment recommendations. <\/p>\n\n\n\n Here is another good site:<\/p>\n\n\n\n https:\/\/drlauryn.com\/detox\/how-to-detoxify-from-mold-exposure-13-essentials\/?fbclid=IwAR0Go0c2rElYgnRr53vncotjyFD0oZQSz8V2nrCRpLuIbD0AqUw0OXjFaFE&mibextid=Zxz2cZ<\/a><\/p>\n\n\n\n Mold binders information in this post<\/a>.<\/p>\n\n\n\n See section 2 in this guide<\/a> for medical testing information. Section 6 about supplements is also good. <\/p>\n\n\n\n The Shoemaker Protocol is popular. They offer a free guide here<\/a>.<\/a> <\/p>\n\n\n\n These are all products I have personally used. I have no connection to any of the companies. All of these are Amazon associates links.<\/p>\n\n\n\n Biocidan: https:\/\/amzn.to\/3u9doJW<\/a><\/p>\n\n\n\n Glutathione: https:\/\/amzn.to\/3QzGOs6<\/a><\/p>\n\n\n\n NAC: https:\/\/amzn.to\/3FQgAwP<\/a><\/p>\n\n\n\n NAG: https:\/\/amzn.to\/3Gg7edU<\/a>https:\/\/amzn.to\/3Gg7edU<\/a><\/p>\n\n\n\n Phosphatidylcholine: https:\/\/amzn.to\/4ckNWm3<\/a><\/p>\n\n\n\n Interphase Plus: https:\/\/amzn.to\/3FTevjG<\/a><\/p>\n\n\n\n Agrisept L (similar to Citridrops): https:\/\/amzn.to\/3QAs3FF<\/a><\/p>\n\n\n\n Lead-safe Neti pot: https:\/\/amzn.to\/40GJZDi<\/a><\/p>\n\n\n\n DMAE: https:\/\/amzn.to\/3Ta3gv9<\/a><\/p>\n\n\n\n Glycine: https:\/\/amzn.to\/47MV6wy<\/a>https:\/\/amzn.to\/47MV6wy<\/a><\/p>\n\n\n\n NADH: https:\/\/amzn.to\/47wWUKx<\/a>https:\/\/amzn.to\/47wWUKx<\/a><\/p>\n\n\n\n Essential oils that are proven to scientifically fight mold are clove, thyme and oregano. It\u2019s best to rotate their use. Do not use these around kids under 2. This is my most trusted brand (it is not an MLM company and I have no affiliation): https:\/\/www.amazon.com\/dp\/B007P70U10\/ref=cm_sw_r_as_gl_api_gl_i_ABV29K60N7B84217CN7X?linkCode=ml2&tag=cleangreentox-20<\/a><\/p>\n\n\n\n There is some research that there is efficacy on Melatonin removing mold mycotoxins that cross the blood brain barrier. Dr Jill Crista recommends melatonin.<\/p>\n\n\n\n Some products that others recommend that I DO NOT use are things like bentonite clay, zeolite, fulvic acid, and Celtic sea salt, because they contain lead. Many of the other binders such as citrus pectin, I couldn\u2019t find organic. In this kind of situation you can make a personal decision of whether to relax your usual avoidance of heavy metals if you feel the benefits outweigh the risks for you. <\/p>\n\n\n\n I also avoid citric acid and enzymes (protease, amylase, etc) as I was told by a mold expert that they are derived from mold. Surprisingly, I saw quite a few products geared to mold detox that contain these. <\/p>\n\n\n\n Binders I do use are activated charcoal: https:\/\/www.amazon.com\/dp\/B01N7UEWKC\/ref=cm_sw_r_as_gl_api_gl_i_SR76VBBB886YQ1RP9D9P?linkCode=ml2&tag=cleangreentox-20<\/a><\/p>\n\n\n\n Glucomannan: https:\/\/amzn.to\/3SxNyJQ<\/a><\/p>\n\n\n\n The lowest lead salt I have found is this. Note that it is from \u201cCeltic Sea Salt\u201d brand but is not actually Celtic salt: https:\/\/amzn.to\/3FZ5SnM<\/a><\/p>\n\n\n\n This post<\/a> has some good supplement and limbic retraining tips. <\/p>\n\n\n\n Please read my blog post about air filter<\/a> options for mold. I recommend everyone have an air filter\/purifier especially if you know you have or have had mold. <\/p>\n\n\n\n I recommend joining at least one mold group on Facebook. Here is one example: Mold Avoidance Community<\/a><\/strong><\/p>\n\n\n\n Strategies for assessing homes for mold, and the search for mold free real estate are available in this link<\/a>. <\/p>\n\n\n\n Watch out for ingredients and enzymes<\/a> extracted from mold, like Aspergillopepsin, protease and other ingredients that end in \u201case\u201d because they cause allergies and skin irritation. These are sometimes added to things like laundry detergent or supplements. Also look out for other mold derivatives; I have warned about citric acid<\/a> for the same reason. I personally feel behavior effects from using skin cream that contains citric acid. <\/p>\n\n\n\n Foods that are thought to be often contaminated (invisibly) with mold include: Tea, coffee, cashews, pistachios, peanuts, dried fruit, grains, corn, aged cheese, fresh okra, fresh basil, chocolate.<\/p>\n\n\n\n Look into an ERV ventilation<\/a> system for your house. <\/p>\n\n\n\n <\/p>\n\n\n\n <\/p>\n\n\n\n <\/p>\n\n\n\n Lots of resources are available from NADCA<\/a> <\/a>including the NADCA Standard ACR Manual<\/a>.<\/p>\n\n\n\n More information from the S520, mentioned earlier:<\/p>\n\n\n\n \u201cUsing antimicrobials, fungicidal coatings, mold-resistant coatings, or sealants\u2026 during mold remediation as a substitute for proper source removal is discouraged. If [they are used], remediators should apply them after completion of remediation, and after completion of post-remediation verification, when necessary.\u201d [Section 12.2.9 \u2013 Clean-Up; page 50]<\/p>\n\n\n\n \u201cPhysically removing mold contamination is the primary means of remediation. Mold contamination should be physically removed from the structure, systems and contents\u2026. Attempts to kill, encapsulate or inhibit mold instead of proper source removal generally are not adequate.\u201d [Section 4.4 \u2013 Principles Of Mold Remediation; page 18]<\/p>\n\n\n\n <\/p>\n\n\n\n Be sure to upkeep the cleaning of your home, including drains. Here is a brush I use to clean them: https:\/\/amzn.to\/47FGA9V<\/a> (Amazon associates link).<\/p>\n\n\n\nCauses of Mold Growth:<\/h2>\n\n\n\n
Dangers of Mold:<\/h2>\n\n\n\n
![\"\"](\"https:\/\/cleangreentoxicantfree.com\/wp-content\/uploads\/2022\/06\/img_5739.jpg\")
I searched for the original source of this image, sorry that I could not find it. It has gone viral I believe so is hard to trace.<\/em><\/figcaption><\/figure>\n\n\n\n![\"\"](\"https:\/\/cleangreentoxicantfree.com\/wp-content\/uploads\/2022\/06\/img_5776-1024x1024.jpg\")
<\/figure>\n\n\n\n
PANDAS \u2013 Pediatric Autoimmune Neuropsychiatric Disorders Associated (PANDA)<\/a>.<\/p>\n\n\n\nMost Common Places for Mold Growth:<\/h2>\n\n\n\n
![\"\"](\"https:\/\/cleangreentoxicantfree.com\/wp-content\/uploads\/2022\/06\/img_5738-1024x1013.jpg\")
<\/figure>\n\n\n\nHow To Prevent Mold:<\/h2>\n\n\n\n
Can Mold be Killed or Sanitized?<\/h2>\n\n\n\n
What To Do If You Have Mold:<\/h2>\n\n\n\n
![\"\"](\"https:\/\/cleangreentoxicantfree.com\/wp-content\/uploads\/2022\/06\/img_5777-899x1024.jpg\")
<\/figure>\n\n\n\nMold Testing Options:<\/h2>\n\n\n\n
What to Look for in a Remediation Company:<\/h2>\n\n\n\n
Mold Detox Tips:<\/h2>\n\n\n\n
Supplements to Aid Mold Detox:<\/h2>\n\n\n\n
More Tips for Avoiding Mold:<\/h2>\n\n\n\n